What am I trying to watch this season?

Helck, Frieren, Spy Family, Shield Hero, Uma Musume Pretty Derby, Kanojo mo Kanojo

What am I actually watching?

Frieren, and Kanojo mo Kanojo, and I'm still trying to finish Love After World Domination.

Most of those shows in the first list are continuations of previous seasons that I haven't finished, so I've got a backlog on the order of Boeing's. I'm actually kinda hoping for a strike next year....

Hide Comments | Add Comment

Hide Comments | Add Comment

One problem I had with the build was the stiffness of the wires for the USB 3.0 ports on the front panel. The two wires from the port melded into a single, fat, plastic-encapsulated plug, and the header for the port on the motherboard, instead of being vertical like most pins, was parallel to the board, and that caused the cables to press against the drive frame. The fix was a simple right-angle adapter meant for exactly this purpose. And it was only $6 and change.

My case also came with a 200 mm fan that sucks air through a screen in the front panel and blows it across the drive bay. It ran virtually silently at 18 db. But the original fan developed a nasty squeak, so I sought out a replacement. Unfortunately this is a unique 20 mm thick fan, and nearly all replacements were 30 mm. There was only one, and the one with the blue LEDs that matched the original was out of stock, so I had to get the red one. Fortunately with the front door shut, you don't really have to see it.

I had a little USB Bluetooth dongle that for some reason I was unable to make work. Broadcomm only makes Windows 7 and earlier drivers, and doesn't support it any more. Then I realized that my motherboard has bluetooth built in. I just hadn't thought of it. It apparently uses the antennas on the back that I hadn't attached because I didn't intend to use the built in wi-fi. So I put on the antennas and enabled the bluetooth and the signal is a lot stronger than the little dongle. I can now use my headphones anywhere in the house without dropouts. However, the phone utilities will be kind of missed.

My case is designed to be a noise suppressor. The left panel even has eggshell foam on it, but I haven't had that panel on for ages because of all the monkeying I had to do with Himawari, and because the numeric display that showed the boot process and temperature was on the motherboard. Even now, I have the LED on Purah's CPU heatsink set to display colors to indicate temperature and the cover off so I can monitor it. But I won't be able to see it if I put the cover back on to control the noise (My homebrew water cooling system was virtually silent). This is from before clear cases became a thing. But I have seen the light. As much as I normally hate all the ludicrous RGB crap that is in fashion, which makes your PC look like a Pride Parade exploded inside it, I finally saw a use for the 12v, 4 pin RGB connector. I spotted some cheap RGB strips (not the more expensive 5 volt ARGB stuff that does chasing lights etc.). I can easily run one on the exterior of the case and set the software to have IT display the CPU temperature where I can see it.

The strip's waiting in my shopping cart while I decide on one more thing, I wanna get a Much bigger drive to replace D (Where all the anime lives.). I could either double it with a 6 TB Western Digital Red for under $100, or go completely mad and get the 14 TB model - which would have more than enough space for running automated backups of the rest of the computer too, confounding my previous plan to take advantage of the drive slot in the top of the case.

I should also consider finding a good way to merge F and H, removing the Windows installs, and consolidating the data and the saved preferences (for programs I haven't reinstalled yet). Although, if I consolidate H to F (The SATA SSD) that frees up another drive. And there's still the stack of drives I was going to run backups to (various 2 and 3 TB drives, but older ones). Decisions, decisions.

And I'm left again pondering the wisdom of water cooling again in my pursuit of silence.

Posted by: Mauser at October 12, 2023 05:14 PM (BzEjn)

Posted by: Mauser at October 13, 2023 08:04 PM (BzEjn)

Posted by: Mauser at October 21, 2023 04:00 PM (sZ6tC)

Hide Comments | Add Comment

So after a water leak messed up my GTX 980 card on Himawari, a friend sold me his GTX 1070 card for a c-note. I was never able to really put it to the test because of the problems Himawari was having doing anything at the time (I could play DVDs fine, but watching YouTube would case dropouts, pink video ports, and bluescreens), Instead I kept using the really old 650 card I didn't realize I still had that I'd put in before I bought the 1070.

Well before this Himawari had been so unstable I couldn't even run World of Warships - which is why I was running it on Etna at minimal video settings for a while, and getting about 30FPS.

Enter Purah, and I decided to go for a little while running the built-in graphics, which could handle YouTube just fine, even at 1440P, and never crashed on anything (Well, Chitubox may have bombed out once, but it merely exited and didn't take anything down with it). At the minimum graphics settings it ran WoWS at around 70 FPS, which is still faster than the TV's refresh rate.

I was considering leaving it like that, or maybe buying the latest hotness in Video cards, but my demands aren't really that high. But then I decided I'd want to see the difference between the built-in graphics and that 1070 card. Just to see if it was faster and to take some load off the CPU. After all, I had it, why not use it?

At those minimum graphics settings, WoWS ran at an absurd 500 FPS, more or less. After clicking the auto settings in the preferences, it turned the graphics all the way up on every setting, and still ran at 80-100 FPS.

I think that's quite good enough for now. True it supports more than the 1440P I'm running it at, but it's comfortable for how I'm set up at the moment.

Posted by: Pete Zaitcev at October 05, 2023 08:14 PM (LZ7Bg)

Posted by: Mauser at October 06, 2023 05:57 PM (BzEjn)

Posted by: Pete Zaitcev at October 07, 2023 08:02 PM (LZ7Bg)

Posted by: Mauser at October 07, 2023 11:14 PM (BzEjn)

Posted by: Mauser at October 07, 2023 11:22 PM (BzEjn)

Posted by: Mauser at October 09, 2023 07:30 PM (BzEjn)

Hide Comments | Add Comment